| COMPARE | MODEL | NOMINAL POWER | THRUST | SPEEDS | FEED | SPINDLE ATTACHMENT | STROKE | FIXTURING OPTIONS | ACCESSORIES | RECOMMENDED HOSE SIZE ID | AIR CONSUMPTION | WEIGHT |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | lbs | 1/min | inches/rev (ipr) | lbs | ||||||||
| 20932/932QR – Boosted | 1.3 | 360 | 450 | 800 1300 | 1600 2000 | 3200 |
0.0005 0.001 0.002 0.003 0.004 |
Specials on Request 1/4″-28 5/16″-24 3/8″-24 9/16″-18 200DA Collet |
Per Application |
•Nose for twist lock bushing with and without vacuum•Concentric Collet | •Nose Indexer•On Board Coolant•Cycle Counter (Service, Maintenance and Cutter Life)•Mitis Chip Fragmentation (internal)•Handle•Cutters | 1/2″ 12mm |
1300 | 4.9 | |
| 20932/932QR – Standard | 1.0 | 360 | 400 | 750 1100 | 1400 1700 | 2700 4500 |
0.0005 0.001 0.002 0.003 0.004 |
Specials on Request 1/4″-28 5/16″-24 3/8″-24 9/16″-18 200DA Collet |
Per Application |
•Nose for twist lock bushing with and without vacuum•Concentric Collet | •Nose Indexer•On Board Coolant•Cycle Counter (Service, Maintenance and Cutter Life)•Mitis Chip Fragmentation (internal)•Handle•Cutters | 1/2″ 12mm |
1190 | 4.9 | |
| 20942/942QR – Boosted | 1.3 | 360 | 450 | 800 1300 | 1600 2000 | 3200 |
0.0005 0.001 0.002 0.003 0.004 |
Specials on Request 1/4″-28 5/16″-24 3/8″-24 9/16″-18 200DA Collet |
Per Application |
•Nose for twist lock bushing with and without vacuum•Depth Sensing Twist Lock•Concentric Collet | •Nose Indexer•On Board Coolant•Cycle Counter (Service, Maintenance and Cutter Life)•Mitis Chip Fragmentation (internal)•Handle•Cutters | 1/2″ 12mm |
1300 | 4.9 | |
| 20942/942QR – Standard | 1.0 | 360 | 400 | 750 1100 | 1400 1700 | 2700 4500 |
0.0005 0.001 0.002 0.003 0.004 |
Specials on Request 1/4″-28 5/16″-24 3/8″-24 9/16″-18 200DA Collet |
Per Application |
•Nose for twist lock bushing with and without vacuum•Depth Sensing Twist Lock•Concentric Collet | •Nose Indexer•On Board Coolant•Cycle Counter (Service, Maintenance and Cutter Life)•Mitis Chip Fragmentation (internal)•Handle•Cutters | 1/2″ 12mm |
1190 | 4.9 | |
| 20952/952QB – Boosted | 1.3 | 360 | 450 | 800 1300 | 1600 2000 | 3200 |
0.0005 0.001 0.002 0.003 0.004 |
Specials on Request 1/4″-28 5/16″-24 3/8″-24 9/16″-18 200DA Collet |
Per Application |
•Nose for twist lock bushing with and without vacuum•Depth Sensing Twist Lock•Concentric Collet | •Nose Indexer•On Board Coolant•Cycle Counter (Service, Maintenance and Cutter Life)•Mitis Chip Fragmentation (internal)•Handle•Cutters | 1/2″ 12mm |
1300 | 4.9 | |
| 20952/952QB – Standard | 1.0 | 360 | 400 | 750 1100 | 1400 1700 | 2700 4500 |
0.0005 0.001 0.002 0.003 0.004 |
Specials on Request 1/4″-28 5/16″-24 3/8″-24 9/16″-18 200DA Collet |
Per Application |
•Nose for twist lock bushing with and without vacuum•Depth Sensing Twist Lock•Concentric Collet | •Nose Indexer•On Board Coolant•Cycle Counter (Service, Maintenance and Cutter Life)•Mitis Chip Fragmentation (internal)•Handle•Cutters | 1/2″ 12mm |
1190 | 4.9 | |
| 20962/962QB – Boosted | 1.3 | 360 | 450 | 800 1300 | 1600 2000 | 3200 |
0.0005 0.001 0.002 0.003 0.004 |
Specials on Request 1/4″-28 5/16″-24 3/8″-24 9/16″-18 200DA Collet |
Per Application |
•Nose for twist lock bushing with and without vacuum•Depth Sensing Twist Lock•Concentric Collet | •Nose Indexer•On Board Coolant•Cycle Counter (Service, Maintenance and Cutter Life)•Mitis Chip Fragmentation (internal)•Handle•Cutters | 1/2″ 12mm |
1300 | 4.9 | |
| 20962/962QB – Standard | 1.0 | 360 | 400 | 750 1100 | 1400 1700 | 2700 4500 |
0.0005 0.001 0.002 0.003 0.004 |
Specials on Request 1/4″-28 5/16″-24 3/8″-24 9/16″-18 200DA Collet |
Per Application |
•Nose for twist lock bushing with and without vacuum•Depth Sensing Twist Lock•Concentric Collet | •Nose Indexer•On Board Coolant•Cycle Counter (Service, Maintenance and Cutter Life)•Mitis Chip Fragmentation (internal)•Handle•Cutters | 1/2″ 12mm |
1190 | 4.9 |
9X2 Series – Positive Feed – Automatic
- Inicio, avance, retracción y parada del ciclo de perforación completamente automático
- 9X2 estándar tiene 0,9 hp/0,75 kW, 9X2 reforzado tiene 1,3 hp/
- 942 y 962 tienen sobrecarga de empuje para avellanar o en caso de que la herramienta se desplace demasiado al taladrar, p. de cortador roto,
- 932 y 952 son solo taladro
- Amplia gama de opciones de fijación y accesorios
- Use husillos de diferentes longitudes para proporcionar el rango de carrera* requerido para la aplicación
- El husillo se puede retraer manualmente en cualquier punto durante el ciclo
- La fragmentación interna de virutas Mitis disponible en 932/942/952 y 962 rompe las virutas durante la perforación para facilitar la aspiración,
- puede reducir el requisito de enfriamiento y prolongar la vida útil del cortador (requiere la opción de husillo M10)
- Muchas opciones personalizables disponibles; contáctenos para obtener ayuda con la configuración
Descripción
